Dyeing Industry Wastewater Belt Press Machine DY1500 Energy Saving CE Certificated

Dyeing Industry Wastewater Belt Press Machine Energy Saving CE Certificated

 

 

DY series belt filter press is the national research institutes with the introduction of foreign advanced technologies based on the successful development of new models, widely used in urban waste water treatment, chemical, oil refining, metallurgy, paper, leather, food, coal washing, printing and dyeing industry, sludge dewatering. Machine continuous operation, high degree of automation, energy saving, high efficiency, easy maintenance, is ideal for sludge dewatering equipment.

 

 

Belt filter press design features:

 

1. Austrial advanced technology, beautiful appearance.

2. Big structural rigidity, smooth operation, low noise.

3. Configure the advanced pre-enrichment equipment, sludge flocculation effect, low operating costs.

4. Gravity dewatering zone configuration advanced distributor, distribution of material to extend the filter life.

5. With a long wedge-shaped gravity dewatering zone and dewatering zone, the material dehydrated fully to ensure that material will not overflow in the press area.

6. Rolls arranged in a scientific and orderly system, gravity dehydration, wedge-shaped dehydration, press dehydration were discharged without disturbing each other. Ratio of large diameter roller press dehydration, dehydration effect, the production capacity, energy efficient.

7. From feeding to discharge the cake continuous operation, high degree of automation, PLC interface can be installed as needed, to facilitate centralized control computer.

8. Power transmission by mechanical or frequency conversion speed range, wide adaptability.

9. Backwash device with reliable, guaranteed filter with the dewatering effect.

10. Pneumatic tension and pneumatic automatic correction device to ensure normal operation of the filter with the security.

11. Safe and reliable operation, infrared security and safety of a full range of emergency stop devices.

12. Can be configured according to different materials with different specifications of the filter, filtering and high precision.

 

 

Compostion of parts:

 

1. Frame

2. Slurry distribution device

3. Upper tray of liquid receiving

4. Dehydration roller system

5. Squeezing roller system

6. Tensioning device

7. Middle tray of liquid receiving

8. Washing device

9. Upper adjusting roller

10. Upper filter belt

11. Upper scraper

12. Bottom scraper

13. Driving device

14. Bottom filter belt

15. Bottom adjusting roller

16. Bottom tray of liquid receiving

 

 

NOTE:

 

1. The machine works smoothly, no vibration impact

2. Bade load is 1.6 times of machine weight. The thickness of concrete durface layer, set of steel bar of concrete foundation are detremined by the user.

3. In addition to the side near to the converyor belt, the other three sides is about 1m away from the machine.

4. Making water collection tank is to collect water, also determined by user

5. The unit is mm.

 

 

Belt filter press technical parameters:

 

Type		DY750	DY1000	DY1500	DY2000		DY2500	DY3000
Filter width(mm)		750	1000	1500	2000		2500	3000
Capacity Into concentration (s.s.1.5~2.5%)		6～9	8～12	12～18	16～24		20～30	28～38
Dry volume(kg/hr)		110～225	150～300	225～450	300～600		375～750	420～950
Moisture content(%)		63～84.5	63～84.5	63～84.5	63～84.5		63～84.5	63～84.5
Motor power(HP)		1.5	1.5	1.5	2.2		2.2	2.2
Reference Dimensions (mm)	L	4250	4250	4250	4250		4250	4250
	W	1630	1880	2380	2920		3420	3920
	H	2100	2100	2100	2100		2100	2100
Weight(kgs)		2570	2920	3590	4490	5520		6220

 

 

Belt filter press typical slurry usage:

 

 

Why choose us:

 

1. Manufacture experience,

Since 1997, we have done a lot of innovation and improvement in the field of filter and separation equipment. We are specialized in design of the filter press according to clients’ requirments, the delivery time of a filter press can be 7 days(if no stock).

2. Technology capacity,

We join and make the standard of filter press industry in China, All of our products have CE certificate, also they will be tested before delivery.

3. Our superiority,

We are in the first class in the field of filter press of China, more than 250,000 m2 land area and continue developing. Filter areas of filter press widely ranges from 1 m2 to 500 m2, you can always choose a right type.

4. Best after-sales,

Supply professional operation training, Timely trouble shooting in 24 hours, we will try our best to solve your problems on the basis of no influence of your equipment working.