Home ProductsBelt Filter Press

High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering

High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering

    • High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering
    • High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering
  • High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering

    Product Details:

    Place of Origin: China
    Brand Name: TOPER
    Certification: CE
    Model Number: DY500

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: Standard container
    Delivery Time: about 30 working days after receive your payment
    Payment Terms: L/C, T/T, D/A, D/P, Western Union
    Supply Ability: 10 sets per month for this belt filter press
    Contact Now
    Detailed Product Description
    Filter Belt Width: 500mm Capacity: 3-5.2m3/h
    Dry Volume: 45-78kg/h Moisture Content: 63-84.5%
    Motor Power: 0.75kw Reference Dimension: 2600*1050*2175mm
    Weight: 830kg Application: Pinting And Dyeing, Urban Waste Water, Chemical
    High Light:

    industrial filter press

    ,

    filter press unit

    DNY Vertical Sludge Belt Press Filter For Waste Water Treatment in mining slurry dewatering

     

     

     

    Belt filter press is the national research institutes with the introduction of foreign advanced technologies based on the successful development of new models, widely used in urban waste water treatment, chemical, oil refining, metallurgy, paper, leather, food, coal washing, printing and dyeing industry, sludge dewatering. Machine continuous operation, high degree of automation, energy saving, high efficiency, easy maintenance, is ideal for sludge dewatering equipment.

     

     

    The belt press filter mainly consists of a driving device, a frame, a press roll, an upper filter belt, a lower filter belt, a filter belt tensioning device, a filter belt cleaning device, a discharging device, an air control system, and an electrical control system.

     

     

     

    the working principle and workflow for belt filter press

     

    1 working principle

     

    The dewatering process of the belt press filter can be divided into four important stages: pretreatment, gravity dewatering, pre-press dewatering in the wedge zone and press dehydration.

     

    1.1 pre-processing stage:

     

    The flocculated material is gradually added to the filter belt, so that the free water outside the floc is separated from the floc under the action of gravity, gradually reducing the moisture of the sludge floc and the fluidity is poor. Therefore, the dewatering efficiency of the gravity dewatering section depends on the nature of the filter medium (filter belt), the nature of the sludge, and the degree of flocculation of the sludge. The gravity dewatering section removes a large part of the water in the sludge.

     

    1.2 Wedge pre-pressure dehydration stage:

     

    After the gravity dewatering of the sludge, the fluidity becomes significantly worse, but it is still difficult to meet the sludge fluidity requirements of the squeeze dewatering section. Therefore, a wedge-shaped pre-pressure dewatering is added between the squeeze dewatering section and the gravity dewatering section In the section, the sludge is dehydrated by slight extrusion in this section to remove the free water on the surface, and the fluidity is almost completely lost. This ensures that the sludge will not be squeezed out in the dewatering section under normal conditions. The conditions for press dehydration are created.

     

     

     

     

     

    Belt filter press application range

     

    It is widely used in the sludge dewatering of urban sewage, textile printing and dyeing, electroplating, papermaking, leather, brewing, food processing, coal washing, petrochemical, chemical, metallurgy, pharmaceutical, ceramics and other industries. It is also suitable for solid separation or industrial production. Liquid leaching process.

     

     

    Belt filter press technical parameters:

     

    Type 

    DNY750 DNY1000 DNY1500 DNY2000 DNY2500 DNY3000
    Filter width(mm) 750 1000 1500 2000 2500 3000

    Capacity Into concentration (s.s.1.5~2.5%)

    6~9 8~12 12~18 16~24 20~30 28~38
    Dry volume(kg/hr) 110~225 150~300 225~450 300~600 375~750 420~950
    Moisture content(%) 63~84.5 63~84.5 63~84.5 63~84.5 63~84.5 63~84.5
    Motor power(HP) 1.5 1.5 1.5 2.2 2.2 2.2

    Reference Dimensions

    (mm)

    L 4250 4250 4250 4250 4250 4250
    W 1630 1880 2380 2920 3420 3920
    H 2100 2100 2100 2100 2100 2100
    Weight(kgs) 2570 2920 3590 4490 5520 6220

     

     

    Belt filter press typical slurry usage:

     

    High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering

     

     

    High Degree Automation Wastewater Filter Press In Mining Slurry Dewatering

     

     

    Contact Details
    Zhengzhou Toper Industrial Equipment Co., Ltd.

    Contact Person: Mrs. Joycee Chen

    Tel: 86-371-86081678

    Fax: 86-371-63720313

    Send your inquiry directly to us (0 / 3000)

    Other Products