Home ProductsBelt Filter Press

Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power

Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power

    • Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power
    • Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power
  • Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power

    Product Details:

    Place of Origin: China
    Brand Name: TOPER
    Certification: CE
    Model Number: DY500

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: Standard container
    Delivery Time: about 30 working days after receive your payment
    Payment Terms: L/C, T/T, D/A, D/P, Western Union
    Supply Ability: 10 sets per month for this belt filter press
    Contact Now
    Detailed Product Description
    Filter Belt Width: 500mm Capacity: 3-5.2m3/h
    Dry Volume: 45-78kg/h Moisture Content: 63-84.5%
    Motor Power: 0.75kw Reference Dimension: 2600*1050*2175mm
    Weight: 830kg Application: Pinting And Dyeing, Urban Waste Water, Chemical
    High Light:

    industrial filter press

    ,

    filter press unit

    Dehydrating sludge belt filter press used in sewage treatment plant with high capacity

     

     

     

    Belt filter press introduction

     

    Belt filter press is a new type based on international advanced technology which was introduced by national scientific research unit and our company. It can be widely used in sludge dewatering of urban sewage treatment, chemical industry,oil refining, metallurgy,papermaking, leather making, foodstuff, coal washing and printing and dyeing industry. It is an ideal equipment to sludge dewatering with advantages of continuous work, high automation, energy saving, high efficiency, and easy maintenace.

     

    The belt press filter mainly consists of a driving device, a frame, a press roll, an upper filter belt, a lower filter belt, a filter belt tensioning device, a filter belt cleaning device, a discharging device, an air control system, and an electrical control system.

     

     

    How folding works

     

    How folding works

    After the concentrated sludge and a certain concentration of flocculant are fully mixed in a static and dynamic mixer, the small solid particles in the sludge are aggregated into a large flocculent mass, and free water is separated at the same time. The sludge is transported to the concentrated gravity dewatering filter belt, and free water is separated under the action of gravity to form sludge in a non-flowing state, and then it is clamped between the upper and lower mesh belts and passes through the wedge-shaped pre-pressure zone and low pressure. The zone and high-pressure zone are gradually squeezed under the action of small to large squeezing and shearing forces to achieve the maximum degree of mud and water separation, and finally a filter cake is discharged.

     

    1. Chemical pretreatment dehydration

     

    In order to improve the dewaterability of sludge, improve the properties of filter cake, and increase the permeability of materials, chemical treatment of sludge is required. This machine uses a unique "water flocculation granulation mixer" device to achieve chemical dosing and flocculation. Function, this method not only has good flocculation effect, but also saves a lot of chemicals, low operating cost and obvious economic benefits.

     

    2. Gravity concentration dehydration section

     

    The sludge is evenly fed into the mesh belt through the distribution bucket. The sludge runs forward with the filter belt. The free water flows into the water receiving tank through the filter belt under its own weight. Gravity dewatering can also be said to be a highly concentrated section. The free water in the medium reduces the fluidity of the sludge and prepares it for further extrusion.

     

    3.Pre-pressure dewatering section of wedge-shaped area

     

    The fluidity of the sludge after gravity dehydration is almost completely lost. As the belt filter press moves forward, the distance between the upper and lower filter belts gradually decreases, and the material begins to receive slight pressure. As the filter belt runs, the pressure gradually increases. The role of the wedge-shaped zone is to extend the gravity dehydration time, increase the compression stability of the floc, and prepare for entering the pressure zone.

     

    4.High-pressure dehydration section of squeeze roller

     

    When the material leaves the wedge zone, it enters the pressure zone. The material is squeezed in this zone. The pressure along the belt running direction increases with the decrease of the diameter of the squeeze roller. The squeezed volume of the material shrinks and the free water in the gap is squeezed out. At this time, the filter cake is basically formed, and the water content of the filter cake can be reduced to a minimum after continuing to the high pressure area at the end of the pressure.

     

     

     

    Application

     

    This machine is suitable for sludge dewatering in wastewater treatment processes in urban sewage treatment plants, pharmaceuticals, electroplating, papermaking, leather, printing and dyeing, metallurgy, chemical, slaughtering, food, brewing, coal washing and environmental protection engineering. In the case of liquid separation, it is an ideal equipment for environmental management and resource recovery.

     

     

     

     

    Belt filter press technical parameters:

     

    Type 

    DNY750 DNY1000 DNY1500 DNY2000 DNY2500 DNY3000
    Filter width(mm) 750 1000 1500 2000 2500 3000

    Capacity Into concentration (s.s.1.5~2.5%)

    6~9 8~12 12~18 16~24 20~30 28~38
    Dry volume(kg/hr) 110~225 150~300 225~450 300~600 375~750 420~950
    Moisture content(%) 63~84.5 63~84.5 63~84.5 63~84.5 63~84.5 63~84.5
    Motor power(HP) 1.5 1.5 1.5 2.2 2.2 2.2

    Reference Dimensions

    (mm)

    L 4250 4250 4250 4250 4250 4250
    W 1630 1880 2380 2920 3420 3920
    H 2100 2100 2100 2100 2100 2100
    Weight(kgs) 2570 2920 3590 4490 5520 6220

     

     

    Belt filter press typical slurry usage:

     

    Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power

     

    Dehydrating Sludge Belt Filter Press 3 - 5.2m3/H Capacity 0.75kw Motor Power

     

     

     

    Contact Details
    Zhengzhou Toper Industrial Equipment Co., Ltd.

    Contact Person: Mrs. Joycee Chen

    Tel: 86-371-86081678

    Fax: 86-371-63720313

    Send your inquiry directly to us (0 / 3000)

    Other Products